Guide · Homeowners and Cafés · 3 min read · Updated 17 November 2026
How Much Does a Coffee Bar Cost to Build in the UK?
Short answer
A simple alcove coffee nook with a base cabinet, worktop, shelves and lighting costs £650–£1,500. A tall larder-style coffee station with pocket doors and sockets runs £1,500–£3,500. A plumb-in water feed and filter adds £220–£550. Commercial café counters start from £4,500, and a full counter with back bar from £9,000, excluding the coffee machine.
Coffee bar prices at a glance
A coffee bar can be anything from a shelf and a socket in an alcove to a full café counter carrying a two-group espresso machine, grinders, a sink and a fridge. The price follows the joinery, the services and the finish. Domestic coffee stations are mostly joinery and electrics, with plumbing only if you choose a plumb-in machine. Commercial counters add heavier construction, stainless or stone tops, drainage and often a dedicated electrical supply. These are typical fitted UK prices for 2026 and do not include the coffee machine, grinder or other appliances.
| Build | Typical price | What it usually includes |
|---|---|---|
| Alcove coffee nook | £650–£1,500 | Base cabinet, worktop, two shelves and LED lighting in an existing recess |
| Tall cabinet coffee station | £1,500–£3,500 | Larder-style unit, pocket doors, pull-out shelf, drawers, sockets |
| Plumb-in water feed and filter | £220–£550 | Cold feed with isolator, filter and backflow protection |
| Integrated coffee machine housing | £350–£900 | Building or adapting a tall housing, appliance excluded |
| Small café counter | from £4,500 | Up to 3 m with laminate cladding, worktop and service grommets |
| Full café counter and back bar | from £9,000 | Stainless or stone tops, sinks, drainage and electrics |
What drives the cost of a home coffee station
For home builds, the biggest choices are size, doors and services. An open alcove nook with a single base cabinet is mostly a carpentry job and can often be completed in a day. A tall coffee station with pocket doors that slide back into the carcass uses specialist hardware that costs more than standard hinges and needs accurate fitting so the doors run smoothly for years. Pull-out shelves for the machine, a drawer for knock boxes and tampers, and a dedicated cup cupboard all add joinery time.
The worktop matters too. Coffee stations see hot drips, spilled milk and the occasional knock box thump, so many people pick quartz, compact laminate, oak with a hard-wearing oil, or stainless steel. Matching an existing kitchen worktop is usually straightforward if the material is still available.
- Pocket door or bi-fold door hardware
- Pull-out machine shelf rated for the machine's weight
- Extra sockets or a dedicated circuit for a powerful machine
- Plumb-in water feed and drainage
- Stone, quartz or stainless steel worktops
- Integrated LED lighting and under-shelf strips
What drives the cost of a café counter
Commercial counters are a different scale of job. The counter must carry a heavy espresso machine, often well over 50 kg for a two-group model, plus grinders and stacked cups, and it must stand up to daily wear from staff and customers. Construction is usually a sturdy timber or steel frame, clad in laminate, timber, tiles or panelling, with a hard top that can be cleaned easily.
Services push costs up the most. A commercial machine typically needs a dedicated electrical supply rather than a plug, a mains water feed with filtration, and a drain for the drip tray and any sink. Under-counter fridges need ventilation gaps, and the counter layout must leave room for staff to work safely behind it. A back bar adds storage, display shelving and often a second worktop for grinders and a till.
Ways to keep costs down
If you have a recess or alcove already, use it. Building into an existing space avoids constructing side panels and reduces the amount of worktop needed. Choosing a pour-over or reservoir-fed machine instead of a plumb-in model removes the plumbing cost entirely, and a single double socket on an existing circuit is usually enough for a domestic machine and a grinder, provided the machine stays within the rating of a standard plug.
For cafés, refurbishing an existing counter by reskinning the front and replacing the top can cost much less than a new build, as long as the structure is sound and the services are in the right place. Standard-depth carcasses with bespoke cladding also keep costs lower than fully bespoke joinery.
It also pays to buy the machine before the joinery is designed. Building a station around a machine you have not chosen yet often means altering shelves later, which costs more than getting the dimensions right first time.
Typical timings
An alcove nook is commonly fitted in one day. A tall coffee station built from bespoke carcasses usually takes one to two days on site after a workshop build of a week or more. A plumb-in feed and filter is often a half-day job if the water supply is nearby, longer if pipework has to run behind other units or under a floor. A small café counter might take two to four days on site, while a full counter and back bar with sinks, drainage and electrics can run to a week or more, with templating for stone tops adding a second visit.
What your quote should show
A useful quote separates joinery, worktop, electrics, plumbing and finishing, so you can see where the money goes and compare like with like. Check whether making good walls, decorating, waste removal and connecting the machine are included. For plumb-in machines, the quote should mention backflow protection, because the Water Supply (Water Fittings) Regulations 1999 require it on appliances connected to the mains. For electrics, ask for certification under BS 7671. We arrange the joinery, plumbing and electrical work as one job, so you get a single price for the whole coffee bar.
Questions people also ask
Is a home coffee bar worth it?
If you make several coffees a day, a dedicated station keeps the machine, grinder, cups and beans together and frees up kitchen worktop. It also hides cables and clutter behind doors. The value depends on having a suitable space, such as an alcove, cupboard or the end of a kitchen run, close to power and ideally water.
Do I need a plumber for a coffee bar?
Only if your machine is plumb-in or you want a sink. Reservoir machines just need power. Plumb-in machines need a cold feed with an isolating valve, a filter suited to your water, backflow protection under the Water Supply (Water Fittings) Regulations 1999, and sometimes a drain connection for the drip tray.
Can a coffee bar go in a cupboard?
Yes, cupboard and alcove conversions are common. The cupboard needs enough depth for the machine with its water tank accessible, a socket inside, and ventilation so heat and steam can escape. Pocket doors that slide back into the sides make it practical to leave the cupboard open while the machine is in use.
Written and checked by the Coffee Bar Builders team. Read our editorial policy.
More guides
How to Plumb In a Coffee Machine at Home: What's Involved
Plumbing in a coffee machine means running a cold mains feed with an isolating valve and a water filter to the machine, fitting backflow protection…
Home Coffee Station Planning Checklist: Space, Power and Storage
Before building a home coffee station, measure your machine and grinder with the lids and portafilter in place, allow at least 600 mm of worktop…
Building a Café Counter and Back Bar: A UK Guide
A small café counter up to three metres starts from about £4,500, and a full front counter with back bar, sinks, drainage and electrics from £9,000.…
Built-In vs Freestanding Coffee Machine: Which Suits Your Kitchen?
A built-in coffee machine sits flush in a tall housing beside ovens, keeping worktops clear, and building or adapting the housing costs £350–£900,…
Get a free coffee bar builders quote
Tell us what you need and we'll come back with a clear price.
Request a quote