Coffee Bar Builders

Coffee Bar Builders

Plumbed Water and Drainage

Mains water feeds, filters and drainage for plumb-in espresso machines, bean-to-cup units and small coffee bar sinks.

Free Coffee Bar Builders quote

No obligation. We only use your details to reply about this job.

Plumbed Water and Drainage — Coffee Bar Builders

What's involved

Plumb-in machines need a cold water feed with an isolating valve and, in most cases, an inline water filter or softener to stop scale. Under the Water Supply (Water Fittings) Regulations 1999, appliances connected to the mains need suitable backflow protection, usually a double check valve if the machine does not include one. The plumber tees off the nearest cold supply, runs 15 mm pipe to the station and finishes with a braided hose connector. If the machine has a drip tray drain, a 22 or 32 mm waste runs to a trap and the main drain. A small bar sink for rinsing jugs is often added. Allow half a day to a day depending on the route. You need to check your machine's inlet thread size and water pressure requirement before booking.

How we handle it

  1. Send us your idea

    Use the quote form to tell us where the coffee bar will go, what machine you use and whether you need water, drainage or new sockets. Photos and rough measurements help.

  2. Site visit and design

    A local joiner measures the space, checks walls and floor, and confirms service routes. You agree heights, storage, finishes and a fixed written price before work begins.

  3. Services first

    Plumbing and electrics are run to the station before joinery is fitted, so pipes and cables are hidden inside the carcass rather than surface-mounted.

  4. Build and fit

    The carcass, shelving, doors and worktop are installed, scribed to walls and fixed securely. Cut-outs are made for grommets, sinks and knock boxes as needed.

  5. Connect and test

    The machine is connected to water and power, leaks and drainage are checked, and certificates are provided for electrical work. The area is cleaned before handover.

Price guide

Coffee bar prices depend on the size of the station, the materials, and whether you need plumbing, drainage or new electrical circuits. A simple alcove with shelves and a socket costs far less than a café counter with a stainless top and full services. Every quote is fixed after a survey and lists exactly what is included.

  • Plumb-in water feed and filter: £220–£550. Cold feed with isolator, filter and backflow protection to a nearby machine position.
  • Integrated coffee machine housing: £350–£900. Building or adapting a tall housing to suit a built-in machine, excluding the appliance.
  • Small café counter: from £4,500. Counter up to three metres with laminate cladding, worktop and service grommets.

Questions about plumbed water and drainage

Do I need a water filter for a plumbed coffee machine?

In most of the UK a filter or softener is strongly recommended, especially in hard water areas such as much of southern and eastern England. Scale builds up in boilers and heat exchangers and is a common cause of breakdowns. Many machine warranties expect a filter to be fitted on plumbed installations.

Get a free coffee bar builders quote

Tell us what you need and we'll come back with a clear price.

Request a quote