Coffee Bar Builders

Coffee Bar Builders

Integrated Coffee Machine Housing

Tall housing units for built-in coffee machines, alongside ovens and warming drawers, with correct ventilation and cut-outs.

Free Coffee Bar Builders quote

No obligation. We only use your details to reply about this job.

Integrated Coffee Machine Housing — Coffee Bar Builders

What's involved

Built-in bean-to-cup machines are designed to sit in a tall housing unit, usually stacked with an oven or warming drawer. The manufacturer specifies an exact cut-out, often 450 mm high by 560 mm wide, plus ventilation gaps at the back or top that must be kept clear to stop the unit overheating. The fitter builds or modifies the housing, fits shelves to the right heights and checks the frame is square so the appliance trim sits flush. A dedicated socket is placed in an adjacent cupboard so the machine can be isolated without pulling it out. Plumb-in versions need a water feed routed into the housing. Allow one day for the housing and fitting. You must have the installation guide for your model ready so dimensions are confirmed before cutting.

How we handle it

  1. Send us your idea

    Use the quote form to tell us where the coffee bar will go, what machine you use and whether you need water, drainage or new sockets. Photos and rough measurements help.

  2. Site visit and design

    A local joiner measures the space, checks walls and floor, and confirms service routes. You agree heights, storage, finishes and a fixed written price before work begins.

  3. Services first

    Plumbing and electrics are run to the station before joinery is fitted, so pipes and cables are hidden inside the carcass rather than surface-mounted.

  4. Build and fit

    The carcass, shelving, doors and worktop are installed, scribed to walls and fixed securely. Cut-outs are made for grommets, sinks and knock boxes as needed.

  5. Connect and test

    The machine is connected to water and power, leaks and drainage are checked, and certificates are provided for electrical work. The area is cleaned before handover.

Price guide

Coffee bar prices depend on the size of the station, the materials, and whether you need plumbing, drainage or new electrical circuits. A simple alcove with shelves and a socket costs far less than a café counter with a stainless top and full services. Every quote is fixed after a survey and lists exactly what is included.

  • Alcove coffee nook: £650–£1,500. Base cabinet, worktop, two shelves and LED lighting in an existing alcove or recess.
  • Full café counter and back bar: from £9,000. Front counter and back bar with stainless or stone tops, sinks, drainage and electrics.
  • Small café counter: from £4,500. Counter up to three metres with laminate cladding, worktop and service grommets.

Questions about integrated coffee machine housing

What is a home coffee bar?

A home coffee bar is a dedicated area for making coffee, usually a cabinet or alcove with a worktop, sockets, storage for cups and beans, and sometimes a plumbed water supply. It keeps the machine, grinder and accessories together and off the main kitchen worktop. Many have doors that close to hide everything when not in use.

How much does it cost to build a coffee bar at home?

A simple alcove coffee nook with a worktop, shelves and lighting typically costs £650 to £1,500. A tall built-in coffee cabinet with pocket doors, drawers and sockets is usually £1,500 to £3,500. Adding a plumbed water feed with a filter costs around £220 to £550, depending on how far the pipe needs to run.

Can I plumb in my espresso machine?

You can if the machine is designed for it, which most commercial and many prosumer models are. It needs a cold water feed with an isolating valve, ideally a filter or softener, and backflow protection. A drip tray drain line is optional but saves emptying the tray. Check the inlet thread and pressure requirements in your manual.

Get a free coffee bar builders quote

Tell us what you need and we'll come back with a clear price.

Request a quote