Coffee Bar Builders

Coffee Bar Builders

Coffee Bar Worktops and Finishes

Durable surfaces and splashbacks for coffee stations: quartz, oak, stainless steel, compact laminate and tiled splashbacks.

Free Coffee Bar Builders quote

No obligation. We only use your details to reply about this job.

Coffee Bar Worktops and Finishes — Coffee Bar Builders

What's involved

Coffee bars take a beating from heat, water, grounds and milk. Quartz resists staining and needs no sealing, which makes it a good all-round choice. Oak looks warm but needs regular oiling and dark rings appear if wet cups sit too long. Stainless steel is hygienic and suits commercial back bars. Compact laminate, around 12 mm thick, is tough, waterproof and can be cut with an integrated drip groove. Splashbacks behind the machine are often tiled, or use glass or a continuous stone upstand. The fitter seals every cut edge so moisture cannot swell the carcass. Timber and laminate tops are fitted on the day, while stone is templated and fitted a week or so later. You need to choose a finish that suits how heavily the station will be used.

How we handle it

  1. Send us your idea

    Use the quote form to tell us where the coffee bar will go, what machine you use and whether you need water, drainage or new sockets. Photos and rough measurements help.

  2. Site visit and design

    A local joiner measures the space, checks walls and floor, and confirms service routes. You agree heights, storage, finishes and a fixed written price before work begins.

  3. Services first

    Plumbing and electrics are run to the station before joinery is fitted, so pipes and cables are hidden inside the carcass rather than surface-mounted.

  4. Build and fit

    The carcass, shelving, doors and worktop are installed, scribed to walls and fixed securely. Cut-outs are made for grommets, sinks and knock boxes as needed.

  5. Connect and test

    The machine is connected to water and power, leaks and drainage are checked, and certificates are provided for electrical work. The area is cleaned before handover.

Price guide

Coffee bar prices depend on the size of the station, the materials, and whether you need plumbing, drainage or new electrical circuits. A simple alcove with shelves and a socket costs far less than a café counter with a stainless top and full services. Every quote is fixed after a survey and lists exactly what is included.

  • Plumb-in water feed and filter: £220–£550. Cold feed with isolator, filter and backflow protection to a nearby machine position.
  • Tall cabinet coffee station: £1,500–£3,500. Larder-style unit with pocket doors, pull-out shelf, drawers and integrated sockets.
  • Alcove coffee nook: £650–£1,500. Base cabinet, worktop, two shelves and LED lighting in an existing alcove or recess.

Questions about coffee bar worktops and finishes

What is a home coffee bar?

A home coffee bar is a dedicated area for making coffee, usually a cabinet or alcove with a worktop, sockets, storage for cups and beans, and sometimes a plumbed water supply. It keeps the machine, grinder and accessories together and off the main kitchen worktop. Many have doors that close to hide everything when not in use.

How much does it cost to build a coffee bar at home?

A simple alcove coffee nook with a worktop, shelves and lighting typically costs £650 to £1,500. A tall built-in coffee cabinet with pocket doors, drawers and sockets is usually £1,500 to £3,500. Adding a plumbed water feed with a filter costs around £220 to £550, depending on how far the pipe needs to run.

What height should a coffee bar worktop be?

Most coffee bars use the standard 900 mm kitchen worktop height, which suits tamping for most people. Taller users sometimes prefer 950 mm. Check the machine height plus the clearance needed above it to fill the water tank and bean hopper, as wall cabinets or shelves too low make refilling awkward.

Get a free coffee bar builders quote

Tell us what you need and we'll come back with a clear price.

Request a quote